- Light and dark germs: Different light conditions
- Different seed types and requirements
- List of dark and light germinators
Help the development of the site, sharing the article with friends!
One hears about dark and light germinators again and again. We reveal the exact difference and which plant belongs to which group.
If you want to propagate plants from seeds, it is rarely enough to simply throw a handful of seeds into the dug bed and hope that a magnificent vegetable or flower garden has grown in the summer. Depending on the plant genus or species, there are a few things to pay attention to when sowing, which must be individually adapted for successful propagation. The budding plants need sufficient water, oxygen, warmth and even now enough sunlight. Depending on the plant, there are differences in germination temperature and duration as well as in the light conditions required for germination. Depending on the required light intensity and light spectrum, the plants are then divided into two groups.
We explain the difference between dark and light germinators and what you have to consider when sowing so that the respective germination is optimally supported. We have also compiled a list of the most important light and dark germinating plants for you.
Light and dark germs: Different light conditions
The fact that fully grown plants react to different light conditions should not surprise many. But even as seeds, plants perceive light and its different intensities. The intensity or the energy contained in the light depends on the wavelength of the light - the light spectrum. Short-wavelength, high-energy light is blue, while long-wavelength, low-energy light appears dark red. The light spectrum is registered in the plant and in the seed by proteins, so-called photoreceptors. The resulting changes that occur in the seed are called photomorphogenesis. This process is necessary for germination of all seeds.
Plants and their seeds react to changes in light with the help of so-called phytochrome receptors. These sensor pigments primarily register the incidence ofred light: bright red (HR at 660 nm) and dark red (DR at 730 nm). Exposure to HR results in conversion of the phytochrome to the active DR form. If you now expose with DR, the active DR phytochrome is converted into the inactive HR form. In the dark, the DR phytochrome falls back to the HR phytochrome. The essential factor here is the ratio of phytochromes. During germination and many other processes, such as flower induction, the ratio of active to inactive phytochromes plays a crucial role, which reflects the external light conditions.
Blue light is registered by cryptochromes, which also contribute to or inhibit germination be able. Germination directly is activated by transcription factors of genes through light information transmission.
So all plants need light for germination. However, different plant species need different light intensities or spectra, which serve as the starting signal for germination. Depending on the light spectrum required, plants are divided into two groups of germination types: dark germinators and light germinators.
Different seed types and requirements
Light germinators need light with a high intensity in the range of blue light or bright red light for germination. The seeds are usually very small and therefore contain little storage material, which the seedling uses as an energy source during germination. Accordingly, if it does not receive enough light, the small plant would not be strong enough to fight its way through a layer of soil when it germinates. The seeds therefore do not even begin to germinate if they lie underground in the dark. For this reason, seeds of light germinators are sown on earth. Light sprouters, like some lettuce varieties, sprout at high HR:DR ratios.
The situation is different with dark germinators: the seeds are usually large and thick. Accordingly, they are bulging with reserve substances for a strong budding. A layer of soil on them is not a problem. On the contrary, the layer of soil filters or dims the light. This is necessary to start the germination process in the seeds of dark germs. The seeds are therefore pressed into the ground during sowing, but only so deep that enough short-wave light can still reach the seeds. Dark germinators like cucumbers (Cucumis sativus) germinate at a low HR:DR ratio (<0,02).
Sowing andDemands of light germinators
The basic process of sowing light germs is the same for all plant species and works as follows:
- Fill a clean seed tray with a high-quality potting soil such as Plantura Organic Herb & Seed Soil
- Flush potting soil
- Drain Excess Water
- Sow the seeds about 2 cm apart on the soil, only pressing lightly to make contact with the soil
- Apply a thin layer of sand to minimize risk of mold (maximum as thick as the seed itself)
- Cover the culture vessel with a foil hood to increase the humidity
- Always keep the substrate moist but not wet (use a water sprayer to prevent the seeds from being washed away)
- Bright location, but no direct sun
- From germination remove the foil hood once a day for ventilation and acclimatization
- Prick out in small pots from about the formation of the second pair of leaves
- Cover pots with foil cover
The crucial thing when sowing light germinators is that the seeds get enough light in the short-wave range. Individual attention must then be paid to the germination temperature and the time of sowing. The germination time can also differ significantly. There are plant species where the first seeds germinate after just a few days and others where you have to wait several weeks for the first seedling.
As an alternative to the seed tray, you can also moisten a handkerchief with water. The handkerchief is spread out and the seeds are spread on it. The cloth is then folded closed so that a single layer of damp handkerchief is underneath and on top of the seeds. The whole thing is placed in a transparent container or bag and left in a bright place at the right temperature until the seeds germinate.
Sowing and requirements of dark germinators
Even with the dark germs you have to set certain parameters individually - depending on the plant species - but in principle the sowing of dark germs works as follows:
- Fill a clean seed tray with potting soil - for example our Plantura organic herb and seed soil
- Water the potting soil from below until the soil is well soaked; drain excess water
- Sow Seeds
- Plant seeds at least twice as deep in soil as the seeds are tall; alternatively seed tray withCover Cardboard
- Cover the seed tray with a foil hood or similar
- Shady location
- Moisten the soil with a water sprayer or pour it carefully
- From germination remove the foil hood once a day for ventilation and acclimatization
- Pricking out in small pots starting with the second pair of leaves
- Cover potty with foil hood
As described for the light germs, the handkerchief version can be used as an alternative to the seed tray. The damp handkerchief layer can also be a little thicker. After that, the wrapped tissue packet is placed in a shady place until the seeds germinate.
List of dark and light germinators
Although you can distinguish between dark germinators and light germinators based on the size of the seed alone, a list gives you a feeling of security. We have therefore put together an overview of dark and light germinating plant species for you.
Examples of light germinators
Light germinators include plants such as:
- Medicinal Valerian (Valeriana officinalis)
- Oyster plant (Mertensia maritima)
- Basil (Ocimum basilicum)
- Savory (Satureja)
- Blackberry (Rubus sectio Rubus)
- Curry herb (Helichrysum italicum)
- Dill (Anethum graveolens)
- Camomile (Matricaria chamomilla L.)
- Coriander (Coriandrum sativum)
- Lavender (Lavandula angustifolia)
- Thyme (Thymus vulgaris)
- Elephant's Foot (Beaucarnea recurvata)
- Strawberry (Fragaria)
- Tarragon (Artemisia dracunculus)
- Foxglove (Digitalis purpurea)
- Garden cress (Lepidium sativum)
- Geranium (Pelargonium)
- Bellflower (Campanula)
- Raspberry (Rubus idaeus)
- Violet (Violoa cornuta)
- Carrot (Daucus carota subsp. sativus)
- Catnip (Nepeta cataria)
- Lettuce (Lactuca sativa)
- Caraway (Carum carvi)
- Snapdragon (Antirrhinum)
- Lily of the valley (Convallaria majalis)
- Marjoram (Origanum majorana)
- Evening Primrose (Oenothera)
- Carnation (Dianthus)
- Oregano (Origanum vulgare)
- Pampas Grass (Cortaderia)
- Petunia (Petunia)
- Peppermint (Mentha × piperita)
- Primroses (Primula)
- Rye (Secale cereale)
- Rosemary (Rosmarinus officinalis)
- Sage (Salvia)
- Celery (Apium)
- Mustard (Sinapis)
- Tomatoes (Solanum lycopersicum)
- Venus Flytrap (Dionaea muscipula)
- Forget-me-nots (Myosotis)
- Virgin Tobacco (Nicotiana tabacum)
- Lemon Balm (Melissa officinalis)
- Lemon Verbena (Lippia citriodora)
Examples for dark germs
Most types of vegetables belong to the group of dark germs, but also other plants such as:
- Aubergine (Solanum melongena)
- Borage (Borago officinalis)
- Christmas Rose (Helleborus niger)
- Monkshood (Aconite)
- Lambs Lettuce (Valerianella)
- Fuchsia (Fuchsia)
- Cucumber (Cucumis sativus)
- Pumpkin (Cucurbita)
- Lovage (Levisticum officinale)
- Lily (Lilium)
- Lupine (Lupinus)
- Maize (Zea mays)
- Parsley (Petroselinum crispum)
- Larkspur (Delphinium)
- Snowdrop (Galanthus)
- Chives (Allium schoenoprasum)
- Sunflower (Helianthus)
- Pansies (Viola tricolor)
- Hollyhock (Alcea)
- Lemongrass (Cymbopogon citratus)
- Zucchini (Cucurbita pepo subsp. pepo convar. giromontiina)
You don't know exactly when which plants should best be sown? Our sowing calendar article can certainly help you!